1800meters HXY-5A spindle type core drill rig

Details

I. General Introduction
HXY-5A CORE DRILL is a kind of hydraulic driven, spindle, diamond bit, small diameter core drill with fairly powerful drilling force. It is mainly suitable for exploration of metal or non-metal solid mineral ore bed. It is widely applied in core drill with diamond bit or hard tungsten-carbide tipped bit in the field of geology, metallurgy, coal mine, hydrological and engineering drilling. It can also be used in the fields of superficial-zone petroleum and natural gas mining, mine workings ventilation and water discharge tunnel drilling as well as foundation pile construction in large diameter.
The machine is fit for engineering works of inclined and vertical hole drilling. It is compact in construction, rational in overall arrangement, moderate in weight, convenient in assembling and wide in range of rotation speed. Equipped with water brake, with high hoisting force, HXY-5A CORE DRILL is convenient to operate in low-position and with water brake application.

II. Main Features of the rig
1. There are more speed grade (8 grades), reasonable speed range, with low speed but high torque. The rig is adapted for core drilling with tungalloy-carbid-tipped and diamond bit, as well as suitable for engineering geological exploration, hydrological well drilling and basic pile engineering.
2. With large spindle I.D. 93mm (3.66 inch), the rig is fed with hydraulic double cylinders with much longer stroke up to 500mm(19.69 inch).With strong technological adaptability, the rig can be adapted on many field, especially on large diameter drill rod drilling, with wire line coring (upper part coring). Thus it is more effective in improving drilling efficiency with less faulty in hole.
3. With powerful drilling capacity, the rated drilling depth comes up to 1,300m(4,264 feet) with 71mm(2.80 inch) drill rod with wire line coring.
4. Light in weight, the rig can be dismantled into 10 parts easily (the biggest one 450kg equivalent to 992 lb). The rig weighs 3,100 kg(6836 lb) (without power unit). It can be moved easily especially in mountain area.
5. The hydraulic chuck adopts one-way oil supply and equipped with hydraulic lock. The chuck is powerful and stable in clamping.
6. Equipped with water brake, the rig is steady and secure in deep hole drilling.
7. Supplying oil with a single-gear pump, it is easy for installation and application; lower in consumption of energy and a low temperature of hydraulic system oil; the rig is for sure in steady drilling. The hand oil pump may be used to hoist the drilling tools in hole upon the faulty of power engine.
8. Compact in structure and reasonable layout, and all exposed outside, non overlapped components, it is easier for maintenance and repair.
9. Low center of gravity and long travelling distance up to 460mm (18.11 inch), the rig is reliable and stable in high speed drilling.
10. It is easy to get to know the conditions in hole with an antivibration meter in long working life. Having less operating handle, the rig can be operated credibly and flexibly.
11. Under high generalization rate, the rig is in universal parts and components up to 30﹪with XY-44 drill rig.

Ⅲ. Main Technical Specifications
1. Drilling Capacity (Core Drilling):

Sorts of Drill Rod		Drill Rod Spec.	Drilling Depth
Home made Drill Rod	Planer in and out	Φ43×6mm(Φ1.69×0.24 inch)	1,800 m (5904 feet)
		Φ54×6mm (Φ2.13×0.24 inch)	1,300 m (4264 feet)
		Φ67×6mm (Φ2.64×0.24 inch)	1,100 m (3608 feet)
	Thickened inner	Φ50×5.5mm (Φ1.97×0.22 inch)	1,500 m (4920 feet)
	Thickened inner	Φ60×6 mm (Φ2.36×0.24 inch)	1,200 m (3936 feet)
	Extracting core with wire line	Φ55.5×4.75 mm (Φ2.19×0.19 inch)	1,600 m (5248 feet)
		Φ71×5 mm (Φ2.80×0.20 inch)	1,300 m (4264 feet)
		Φ89×5 mm (Φ3.50×0.20 inch)	1,000 m (3280 feet)
DCDMA (Diamond Core Drill Manufacturer Association) made Drill Rod	Thickened inner	BW	1,500 m (4920 feet)
		NW	1,200 m (3936 feet)
		HW	900 m (2952 feet)
	Extracting core with wire line	BQ	1,800 m (5904 feet)
		NQ	1,300 m (4264 feet)
		HQ	1,000 m (3280 feet)

2. Drilling Angle:  0°～360°(90°～75°, when drilling with a drilling tower)
3. Power Unit:
（1）Electrical Motor         Y250M-4          55 kw(73.8HP)     1,480 rpm
（2）Diesel Engine           Deutz BF6L913     84 kw(114.3HP)     1,500 rpm
4. Rotator:
   Type: dual-cylinder hydraulic feeding mechanical rotating
   I.D. of Spindle:     Φ93mm(3.66 inch)
   Rotating Speed of Spindle (rpm) :
          Positive: Low Speed   95；166；249；359;
High Speed   330；575；865；1246
          Negative: 55; 191
   Max. Torque of Spindle:   5,500 N·m (4053.5 lbf·ft)
   Stroke of Spindle:        500 mm(19.69 inch)
   Max. Lifting Capacity of Spindle: 135 kN(30348 lbf)
   Max. Pressuring Force of Spindle: 100 kN(22480 lbf)
5. Hoister:
Type: Planetary gearing transmission
Steel Wire Cable Dia.:     18.5 mm(0.73 inch)
Drum Capacity for Cable: 120 m(394 feet)  (Φ18.5 mm equivalent to 0.73 inch steel wire rope)
   Max. Lifting Force(single line):    60 kN(13488 lbf)
   Lifting Speed of the Wire Cable: (Power Eng. Speed at 1,500 rpm)
    0.77；1.35；2.03；2.93 m/s (2.53；4.43；6.66；9.61 feet/s)
6. Clutch:
Type: Dry Double Chips Friction Clutch (normally closed)
7. Gearbox:
   Type: Sliding Gear Gearbox (4 positive speeds and 1 negative speed)
8. Hydraulic System:
（1）System Pressure:
Working Pressure:    8 Mpa(1160 psi)
Max. Pressure:      12 Mpa(1740 psi)
（2）Oil Pump:
Type:      Double Gear Pump
Displacement:        32+12 L/min (8.5+3.2 US Gallons/min)
Working Pressure:     20 Mpa(2901 psi)
Max. Pressure:        25 Mpa(3626 psi)
9. Water Brake:
Working Speed:   700 ~ 800 rpm
Single Rope Compensational Speed:   3~8 m/s(9.8~26.2 feet/s)
Single Rope Compensational Load:    45 kN(10116 lbf)
10. Drill Frame:
Type:      Sliding Skids (with sliding base)
Backward Stroke:       600 mm (23.62 inch)
Dimensions(L×W×H):   3700×1300×2175 mm(145.67×51.2×85.63 inch)(with diesel engine)
3500×1300×2175 mm(137.8×51.2×85.63 inch) (with electromotor)
11. Weight of the Rig (without power unit) :            3,100 kg(7936 lb)
12. Weight of the biggest dismountable section:       450 kg(992 lb)

About us

We are a professional supplier of diamond core drilling rigs in China ,

We supply spindle type diamond core drilling rigs and all hydraulic core drilling rigs with the drilling capacity from 100 meters to 4200meters, mud pumps and other related drilling tools can be supplied as well.

We warmly welcome clients from all over the world to contact us for any inquiry, and we will try our best to provide professional service to satisfy you.

Service

Shipping time depends on the destination.
After we ship the goods, we will email you the shipping information, as well as tracking details.
The goods will be delivered by the most reasonable way for delivery.

Warranty and After-sales services:

1.  All of our drilling rigs are provided warranty period and after-sales services, pls contact us for details.

2.  We offer life-long technical support to our drilling equipments, please contact us freely if you have any question to our drilling equipment you received, we will tell you how to solve the problem by email or phone.

Feedback:

1. Therefore, your feedback is extremely important to us, please leave good feedback to us if you get satisfied with our goods and service

2. We care about our valued customers, and will always try to help you